Diablosport 2015-2017 Modified PCM & Tuner Package
*The CAL ID is found on the small sticker usually attached to the PCM
DiabloSport has announced another first to market tuning release-Their inTune i3 & Trinity 2 performance programmers now support 2015-2017 Chrysler 300, Dodge Challenger, and Dodge Charger with a 5.7L and 6.4L HEMI. This new tuning solution requires that the user either modify their vehicle’s current PCM, or pick up a spare to unlock it-more on that in a minute.
As the industry leader in HEMI tuning, you can expect no less than the best from DiabloSport’s engineering and calibration team when it comes making power on your Mopar. Theirtunes for 93 octane have been dyno and street proven, with gains of 15 rear wheel horsepower and 20 ft.lbs of torque - and that’s on a stock car! If you’ve modified your ride, their inTune & Trinity tuners let you adjust key vehicle parameters like calibrating the speedometer for larger tires and gears, adjust idle RPM, dial in your throttle response with “throttle booster technology”, and you can even modify performance parameters like timing/fueling/idle and more!
To unlock your car’s potential, you will need an aftermarket PCM that you can swap with your existing factory computer by just unscrewing a few of bolts. Once you’ve installed the Diablo modified PCM, you can tune your car for any combination of aftermarket performance mods, or even add power to a stock vehicle!.
Here’s how it works: Provide us with your vehicle’s VIN and Odometer mileage and we will send out an aftermarket PCM and any tuning devices you need to tune the vehicle. You will replace your vehicle’s stock PCM with the aftermarket Diablo PCM through a simple process that should only take about twenty minutes. Once you have replaced the factory PCM, you can install a tune with your DiabloSport tuner and you’re ready to go! If you need to go to the dealership for service work, re-install your original PCM and the dealer will not be able to tell that you have done any modifications.
There is also an option to send your vehicle’s current PCM into DiabloSport for us to reprogram it for $200. While this option costs less, there are some important things to note about modifying your existing PCM. The first and most important is that sending your factory PCM in for the unlock service could take between 3-5 business days. Additionally, if you unlock your factory PCM and do not have a spare, you may have issues at the dealership if they need to reflash for any reason. We always advise that you use the option for an additional modified PCM so you have more options.